manualshive.com logo in svg
background image

  For your safety the information in

this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.

- Do not store or use gasoline or other flammable

vapors and liquid in the vicinity of this or any other
appliance.

- WHAT TO DO IF YOU SMELL GAS

·

Do not try to light any appliance.

·

Do not touch any electrical switch; do not use
any phone in your building.

·

Clear the room, building or area of all
occupants.

·

Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier's
instructions.

·

If you cannot reach your gas supplier, call the
fire department.

Installations must be performed by a qualified or
licensed contractor, plumber, or gasfitter qualified
or licensed by the state, province, or region where
this appliance is being installed.

Contents

SUBJECT

PAGE

Pre-Installation Requirements

2

Electrical Requirements

2

Exhaust System Requirements

2-3

Gas Supply Requirements

3

Location of Your Dryer

4

Mobile Home Installation

5

Rough-In Dimensions

5-6

Unpacking

6

Reversing Door Swing

6

Electrical Installation

7

Grounding Requirements

7

Electrical Connections—3-wire

8

Electrical Connections—4-wire

8

Installation

9

Replacement Parts

9

Printed in U.S.A.

P/N 134296400B (0404)

Installation

Instructions

Gas & Electric

Dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer
is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference.

NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.

NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

NOTE: The Dryer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only.
This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

Содержание GLGR642AS5










Отзывы: