5
ENGLISH
–
Make settings of the unit (see OPERATION
MODES section).
–
Switch cooking/chopping on, by pressing the but-
ton (16) , the button backlight will change color
from red to green.
–
After cooking/chopping is over, you will hear 4
sound signals.
–
To stop operation of the cooking/chopping mode
press the button (16) .
Attention!
•
Do not remove the bowl (4) from the motor unit (1)
during operation.
•
During making of soup and soup puree steam can
escape from under the lid (8), it is normal and not
a malfunction.
•
Bowl (4), lid (8) and measuring cup (9) get hot
during soup and soup puree cooking, do not touch
hot surfaces with exposed parts of your body and
do not lean over the unit.
•
When cooking dishes with a lot of spices and sea-
sonings, wash the bowl (4) right after cooking.
•
To avoid damage of the bowl (4) coating, do not
put the bowl (4) into cold water right after cook-
ing; let it cool down preliminarily.
•
The bowl (4) is not intended for washing in a dish-
washing machine.
OPERATION MODES
Setting the heating temperature and cooking
time
You can use the unit for cooking soups, by setting
temperature of the heating element (5) and the cook-
ing time from 1 to 90 minutes. After finishing the op-
eration in medium or high temperature mode, the unit
will be switched to keep warm mode (60°C). The keep
warm mode lasts 25 minutes.
–
In the standby mode, press the button (13) to
select the heating temperature - high (100°C),
medium (80°C) or low (60°C), the button (13) back-
light will flash.
–
Set the cooking duration by consequently press-
ing or holding down the buttons (11) «+/-».
–
Press the (16) button, the unit starts cooking:
cooking time countdown starts, button (16)
will flash green and symbol will appear on the
display (3).
–
If you set the low heating temperature, after cook-
ing the unit will be switched to the standby mode.
–
If the unit was operated in the medium or high tem-
perature mode, after cooking you will hear three
sound signals and the unit will be automatically
switched to the keep warm mode. After 25 min-
utes the unit will be switched to the standby mode.
–
To switch the keep warm mode off ahead of pre-
set time, press the button (16) .
Automatic modes (keep warm mode is not available)
“SOUP” mode
The “Soup” automatic mode duration is fixed, it is 28
minutes. The unit brings the liquid to the boiling point
and keeps the temperature of 100°C for 1 minute.
Then soup maker is switched to the moderate heat-
ing mode (5 seconds - heating, 10 seconds - pause).
–
In the standby mode, press the button (17) “Soup”,
the button backlight will flash, the display will show
the cooking time set by default.
–
Press the (16) button, the unit starts cooking:
the display (3) will show the symbol and the
remaining operation time, the button
flashes
green.
–
Stir soup periodically. To do this, press and hold
down the button (18) “MIXING”.
“SOUP PUREE” mode
Duration of the “Soup puree” automatic mode is
fixed; it is 25 minutes. At the first stage of cooking the
unit brings the liquid to the boiling point and keeps the
temperature of 100°C for 1 minute. Then soup maker
is switched to the moderate heating mode (5 seconds
- heating, 10 seconds - pause). The first stage of
cooking lasts 17 minutes. The second stage of cook-
ing consists of 2 cycles “chopping-pause-heating”
and lasts for 7 minutes, the third stage is the cycle
“chopping-pause-chopping” and lasts for 1 minute.
Attention! Never add ingredients during the sec-
ond and third stages of the “Soup Puree” pro-
gram!
–
In the standby mode, press the button (15) “SOUP
PUREE”, the button backlight will flash, the display
will show the default cooking time.
–
Press the (16) button, the unit starts cooking:
the symbol and remaining operation time will be
shown on the display (3).
–
The symbol
appears on the display (3) during
chopping.
“Blender” mode
The “Blender” mode allows to chop and mix different
products. The unit has four rotational speeds of the
knife (6), where “01” is the minimum speed, “04” is
the maximum speed of rotation. Maximal operation
time is 3 minutes.
By default, the unit has the following settings: speed
of rotation - “03”, operation time - 2 minutes.
VT-2620.indd 5
20.06.2014 15:47:21
