6
ENGLISH
Step three – cutting in the temples area
Switch the hair clipper off, set the shifter (3)
to the position for shorter hair and cut hair at
the temples. Then set the shifter (3) to the
position for longer hair and continue cutting
towards the top of the head.
Step four – cutting the crown of the head
Cut the hair from the top of the head towards
the crown against the hair growth direction.
•
You can cut hair against and along the
direction of hair growth, but keep in mind
that the hair cut against the growth will be
shorter than the hair cut along the growth.
•
Use the attachment (8) for short haircut
(1-15 mm). To leave longer hair use the
attachment (9) (16-30 mm).
•
To leave longer hair, grip hair locks between
your fingers and cut it using the hair clipper.
•
You can use the comb: lift the hair locks
and cut them with the hair clipper over
the comb.
•
Always start cutting from the back of the
head.
•
Comb the hair with a comb to reveal uneven
locks.
Step 5 – the final part
In the final stage of hair styling remove the
installed attachment (8 or 9) from the clipper,
turn the blades of the clipper towards the
hair and trim hair on the temples and neck
carefully. Do not press the clipper strongly,
there is danger of injuries or cuts when open
blades come in contact with skin.
Note: during the breaks between operations
switch the hair clipper off, setting the power
switch (4) to the position «ON».
•
After you finish cutting hair switch the hair
clipper off, setting the power switch (4) to
the position «ON».
•
Remove the attachment (8 or 9) and clean
it from hair, remove the blade block (7)
and clean it with the brush (10) (pic. 1, 4).
•
Lubricate the blade block (7) with a drop
of oil (11).
Hair thinning function
•
Hair thinning means cutting off separate
locks to create smooth transition between
locks of different length.
•
Due to thinning out the haircut keeps its
style for a long time.
•
Hair thinning is performed at the final
phase of hair cutting.
•
To extend the hair thinning comb (1),
move the lock (2) to the utmost left
position. To remove the hair thinning
comb (1), move the lock (2) to the utmost
right position.
•
Install the necessary attachment (8 or 9),
set the required remaining hair length by
turning the shifter (3) and cut your hair.
•
After you finish hair thinning switch the
hair clipper off by setting the power
switch (4) to the position «ON».
CUTTING BEARD AND MUSTACHE
Use open blades (7) to shape beard and
mustache, use the attachments (8, 9) to cut
off certain hair length.
•
While cutting beard or mustache for the
first time, install the attachment (8), set
the shifter (3) to the maximal position
(15 mm) and gradually reduce the remain-
ing hair length by turning the shifter (3)
until you reach the desired hair length.
•
To cut the beard symmetrically, it is rec-
ommended to start cutting from the ear to
the chin on the one side of the face, and
then repeat the beard cutting on the other
side of the face.
•
When cutting mustache, first comb it with
the comb (13) and start cutting from the
middle of the mustache to the corners
of the lips.
•
You can use the scissors (14) to trim the
mustache.
CLEANING AND CARE
–
Switch the hair clipper off after using it.
–
Remove the installed attachment (8 or 9).
–
Clean the attachment off hair with the
brush (10).
–
Remove the blade block (7) (pic. 1).
–
Clean the blade block (7) (pic. 4) and
the clipper inner cavity under the blade
block (7) with the brush (10). Do not wash
the inner cavity of the hair clipper body
under a water jet.
–
Clean the hair clipper body with a soft,
slightly damp cloth, and then wipe it dry.
VT-2588.indd 6
12/18/19 4:55 PM
