Vitek VT-2451 BK, Инструкция по эксплуатации

Страница: 7 / 68

7
ENGLISH
Materials and cookware not suitable for microwave ovens
Aluminium trays and foil Aluminium trays and foil may cause sparks. Use the
cookware specially intended for microwave oven.
Cardboard cup with metal handle Cardboard cups with metal handle may cause sparks.
Use the cookware specially intended for microwave
oven.
Metal cookware or cookware with
metal rim Microwaves can not go through metal. Metal rim may
cause sparks.
Metal twist-ties Metal twist-ties may cause sparks and ignition of the
package during cooking/heating up food.
Paper bags Paper bags may cause fire in the microwave oven.
Soap Soap may melt and make the oven cavity dirty.
Wood Wooden cookware may dry out, crack and inflame.
ASSEMBLING OF THE MICROWAVE OVEN
After oven storage at low temperature or its
transportation in winter conditions, it is nec-
essary to keep it unpacked for at least 3 hours
at room temperature before switching on.
–
Remove the package and the accessories
from the oven cavity.
–
Check the microwave oven for damages. Pay
special attention to the oven door. If there is
any defect, do not install and do not switch
the oven on.
Protective covering
Body:
if there is a protective film on the unit
body, remove it from the surface of the body.
Do not remove the light-gray mica plate
inside the cavity at the microwave output
point (7), as it serves for magnetron protec-
tion.
Installing the glass rotary bottom plate
46.
Open the oven door (2).
47.
Set the roller support (3) of the glass rotary
bottom plate into the opening located in the
bottom of the oven cavity.
48.
Install the roller ring (4).
49.
Carefully set the glass rotary bottom plate
(5) on the roller ring (4) and the support (3).
Never set the glass rotary bottom plate with
its bottom side up.
Notes:
•
Do not prevent rotation of the glass rotary
bottom plate (5) while oven operation.
•
Always use the glass rotary bottom plate (5),
roller ring (4) and the support (3).
•
Always use the glass rotary bottom plate (5)
and the roller support (3) when cooking.
•
Food and cookware should be always placed
only on the glass rotary bottom plate (5).
•
During operation of the oven the glass rotary
bottom plate (5) can rotate clockwise or
counterclockwise.
•
If cracks or chops appear on the glass rotary
bottom plate (5), replace it immediately.
INSTALLING THE MICROWAVE OVEN
–
Before switching the unit on, make sure
that the operating voltage and input power
of the unit correspond to your mains speci-
fication.
–
Connect the microwave oven to a mains
socket with reliable grounding contact.
–
Set the microwave oven on a flat and hard sur-
face that will bear its weight and maximal weight
of the products which will be cooked in it.
–
Do not install the unit in places with high mois-
ture and temperature, and near inflammable
objects.
–
Set the unit in places out of reach of children.
–
Place the microwave oven keeping at least a
20 cm gap from the sides and the rear of the
oven to the wall and a 30 cm gap above the unit.
–
Do not remove the supporting legs from the
bottom of the oven.
–
Do not block ventilation openings in the unit
body.
–
It is necessary to place the microwave oven
away from TV-sets or radio receivers to avoid
interferences in the reception of TV and radio
signals.
WARNING:
In case the oven is damaged due to the user,
the user is deprived of the right for free war-
ranty maintenance and repair of the unit.
IM VT-2451.indd 7 30.11.2016 14:29:48