Vitek VT-1452 ST, Инструкция по эксплуатации, Страница: 6 / 28

6
ENGLISH
• Carefully remove the knife (8) taking it by the
plastic end.
• Take the chopped products out of the chop-
per bowl (7).
Attention!
Strictly follow the described sequence of opera-
tions.
To achieve the best results, refer to the table
below:
Product type Weight, g.
Approximate
processing
time
Meat 250 15
Herbs 50 10
Nuts 150 15
Cheese 100 10
Bread (rusks) 80 10
Onions 200 10
Cookies 150 10
Soft fruits 200 10
CLEANING
Attention! The blades of the chopping knife
(8) are very sharp and may be dangerous.
Handle the chopping knife (8) very carefully!
•
Unplug the unit before cleaning.
• Remove the attachments. Use a slightly
damp cloth to clean the motor unit (3) and
the gears (9, 12), then wipe them dry.
• After processing salty or sour products it is
necessary to rinse the chopping knife (8)
and the blender attachment (1) with water
right after use.
• While processing products with strong dye-
ing properties (for instance, carrot or beet-
root), the attachments or bowls can get
colored, wipe them with a cloth dampened
in vegetable oil, then wash the attachments
with neutral detergent and rinse.
• Wash the attachments (1, 11), the chopping
knife (8), the measuring cup (10) and the
chopper bowl (7) in warm soapy water, rinse
and dry them.
DO NOT IMMERSE THE MOTOR UNIT (3)
AND THE GEARS (9, 12) INTO ANY LIQUIDS,
DO NOT WASH THEM UNDER WATER JET
OR IN A DISHWASHING MACHINE.
STORAGE
•
Clean and dry the unit thoroughly before
taking it away for long storage.
• Do not wind the power cord around the
motor unit.
• Keep the unit in a dry cool place out of reach
of children and disabled persons.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1pc.
Measuring cup – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Power: 900 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 2004/108/ЕС
and to the Low Voltage Regulation
(2006/95/ЕС)
VT-1452.indd 6 14.09.2015 11:24:59