Vitek VT-1238 VT, Инструкция по эксплуатации

Страница: 8 / 56

8
ENGLISH
ulator (11) to the « MIN » position .
• Pull the plug out of the socket.
• Hold the iron above the sink, press and
hold the button (14).
• Boiling water together with scale will be
throwing out from the openings in the iron
soleplate (13).
• Slightly sway the iron back and forth, until
water goes out of the water tank (10).
• Place the iron on the base (8) and let it
cool down completely.
• When the soleplate (13) cools down com-
pletely, wipe it with a dry cloth.
• Before you take the iron for storing, make
sure that there is no water in the water
tank (10) and that the iron soleplate (13) is
completely dry.
CARE AND CLEANING
• Before cleaning the iron, make sure that it
is turned off and has cooled completely.
• Wipe the iron's outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron soleplate can be
removed with a cloth soaked in vinegar-
water solution.
• After removing sediment, polish the sole-
plate with a dry cloth.
• Do not use abrasive substances to clean
the soleplate and body of the iron.
• Avoid touching the iron soleplate with
sharp metal objects.
STORAGE
• Turn the temperature regulator (11) anti-
clockwise till MIN position, set the steam
release regulator (3) to the steam release
OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the
iron and pour out any remaining water
from the water tank (10).
• Close the lid (2).
• Set the iron vertically and allow it to cool
completely.
• Keep the iron at dry cool place in vertical
position out of the reach of children.
TECHNICAL CHARACTERISTICS
Power requirements: 220-240 V ~ 50 Hz
Power consumption: 1850-2200 W
Specifications subject to change without
prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale
or receipt must be produced when making
any claim under the terms of this guarantee.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
VT-1238_IM.indd 8 14.10.2013 14:17:16