Installation Instructions
• In the case of installation with Flush / Surface / Tilted mount, IP protection
rating is not guaranteed.
• If power, Video, Network connectors are exposed to water or rain, a separate
protection shield is essential.
CAUTION
* Refer to the signal assignment for wiring connection.
Cables are unattached on the Dome base.
Disassemble coupler board for LAN cabling.
Connect the ethernet and power cables to their respective connections.
Cables are unattached on the Dome base.
Organize the cables to attach the dome base as illustrated.
Attach the power supply connector with screw.
Connect the ethernet cable to the coupler board.
Tie up the cables with the cable holders.
Check the final view for cable exit.
Connect the wiring connector to their respective connections.
Cable holder-1
Coupler Board
■
Option 2.
Installation with Surface mount / Tilted mount
■
Option 1.
Installation with Flush mount / Tilted Junction mount
Cable holder-2
3
4
5
1
Connector
screw
2
24
25