Installation Instructions
Set the camera’s orientation and tighten the Lock/Unlock screws using
hex wrench.
Open the side cover to insert the Micro SD memory or control the Zoom /
Focus using the joystick.
After adjusting the settings, close the side cover and tighten it.
Put the sunshield on the camera unit and tighten the sunshield bolt.
Adjustment of viewing angle with a bracket
• Extreme care should be taken NOT to scratch the surface of window during
camera installation or adjusment.
• Care should be taken so the cable is NOT damaged, kinked or exposed in
a hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
a spotlight.
CAUTION
Hex
wrench
17
