Installation Instructions
1. Remove the dust protection cap from the lens mount.
2. Screw the lens onto the camera firmly.
3. Plug the lens plug into the lens connector on the side of front case.
4. Mount the camera to a wall or ceilling with a corresponding mounting bracket
through the camera mount holes (1/4” thread insert) on its top or bottom.
CAUTION
Installation Instructions
• Make sure the power is removed before the installation.
• Connect PoE(IEEE Std. 802.3af) or the power supply to the power terminal
on the rear panel of camera first.
• Plug in the power adaptor.
Power Supply Connections
• Care should be taken so the cable is NOT damaged, kinked or exposed in
a hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or a
spotlight.
Start up
When the camera is powered properly, it starts up with initializing the internal
parameters.
The camera can work with PoE(IEEE Std. 802.3af) and either 24VAC or 12VDC,
dual voltage power. It does NOT require the polarity-matched connection for
12VDC supply.
Primary and secondary grounds are completely isolated to avoid a possible
ground-loop problem. Its wide operating voltage range of 10.5V-30V
for DC and 12-28.8V for AC gives extra flexibility at installation.
When PoE and Local dual power are connected at the same time, Local
power has priority.
29
