vitapur VWD6956BLS Скачать руководство пользователя страница 8

7

Cleaning the Inside of the Dispenser

To prevent mineral deposits that can affect the taste and flow of the water and to ensure proper product
performance, your water dispenser must cleaned every 4 months.

1

. Make sure the power switch is in the OFF position.

2

. Remove the water bottle and bottle support collar.

3

. Drain the reservoirs. (See Draining the Reservoirs, pg. 6).

4

. Pour the water dispenser cleaner or a mixture of 0.3 gal / 1 L of vinegar

with 0.3 gal / 1 L of hot water into the reservoir and wait 20 
minutes. If using a water dispenser cleaning solution, please follow 
the manufacturer’s instructions.
IMPORTANT: To avoid water overflow while cleaning the dispenser, 
always remove the bottle support collar before pouring water or 
cleaning solution into the reservoir. (See Figure A, page 3).

5

. Press all dispensing buttons until water no longer comes out. 

6

. Drain the reservoirs.

IMPORTANT: Collect the water into a container, not the drip tray.

7

. Rinse with clean water.

8

. Replace the bottle support collar and the water bottle. (See Installing the Water Bottle, pg. 3).

IMPORTANT: Drain approximately 4 glasses of water from each button before initial use. 
This does not need to be done with replacement bottles.

Going Away on Vacation

When not using the dispenser for long periods of time or when going on vacation, conserve energy 
by setting the power switch to the OFF position, unplug the dispenser and drain the reservoirs. 
(See Draining the Reservoirs, pg. 6)Follow Initial Product Cleaning Procedures (pg. 3) upon return
and startup of the dispenser.

Cleaning Kit

Available online at

www.greenwayhp.com 

SPECIFICATIONS

VWD6956BLS

Output per hr

Hot

1.2 gal / 4.6 L 

Cold

0.5 gal / 2.0 L

Internal Tank:

Hot

0.2 gal / 0.6 L

Cold

0.8 gal / 3.2 L  

Heating Temp (approx.):

194°F / 90°C

Cooling Temp (approx.):

46°F / 8°C

Power Consumption

Hot

1100 W

Cold

90 W

WARNING: The Water Dispenser
heats and dispenses water to 
194˚F / 90˚C which can cause severe
burns or scalding.

DO NOT ALLOW CHILDREN TO USE
THE HOT WATER DISPENSING 
BUTTON WITHOUT PROPER AND
DIRECT SUPERVISION.

Childproof 

safety switch

Содержание VWD6956BLS











Отзывы: