vitapur VWD6956BLS Скачать руководство пользователя страница 7

6

Drain
valve

Condenser 

coils

Cleaning Your Water Dispenser

IMPORTANT: Make sure you turn the power switch to the OFF position and unplug the dispenser
before performing any of the following cleaning procedures.

Cleaning the Outside of the Water Dispenser

The outside of the dispenser can be wiped clean with a water dispenser cleaning solution or a mild 
soap and water mixture. Never use harsh chemicals or abrasive cleaners. Rinse thoroughly with clean
water and then dry the surfaces.

Cleaning the Drip Tray

To remove, take the grill off the drip tray and firmly lift the tray up, dislodging it 
from the dispenser. Drain and clean.

The drip tray should be emptied and cleaned regularly to remove spotting 
and any mineral deposits. Clean with a water dispenser cleaning solution or 
a mild soap and water mixture. For tough deposits, add vinegar and let it 
soak until the deposits come loose. Then wash, rinse and dry thoroughly.

To replace, put the grill back on the tray and slide the tray onto the guides.

grill

drip tray

Cleaning the Condenser

Vacuum or sweep away the dust from the condenser coils at the 
back of the dispenser. For best results, you can purchase 
a brush designed specifically for this purpose from your 
local appliance store. This will improve cooling and efficiency
of your unit.

Draining the Reservoirs

Drain the reservoir • Before and after cleaning your unit. 

• When going on long vacations.
• If you are not using the dispenser for long periods of time. 

IMPORTANT! Turn the power switch to the OFF position and unplug the dispenser before 
performing this procedure. Dispense hot water until temperature drops to a safe level to avoid
the risk of scalding.

1

. Remove the water bottle.

2

. Press all dispensing buttons until water no longer comes out.

3

. Place a bucket beneath the drain outlet on the back of 

the dispenser.

4

. Remove the cap and plug from the drain valve and let the water

flow into the bucket. Replace the cap and plug. A screwdriver or 
coin can be used to help loosen the drain cap.
IMPORTANT: Collect the water in a container, not the drip tray.

5

. Replace the water bottle. (See Installing the Water Bottle, pg. 3).

 

Содержание VWD6956BLS











Отзывы: