Cleaning the Inside of the Dispenser
Like most appliances, your water dispenser requires periodic maintenance for
maximum efficiency and performance and must be cleaned on a regular basis (i.e.
every 4 months). To maintain a hygienic environment within your water dispenser
and prevent potential formation (growth) of bacteria, we strongly recommend regular
cleaning. A cleaning kit is available through our Customer Service Department at
1-866-253-0447
or can be ordered on line at
www.greenwayhp.com
.
1.
Unplug the power cord.
2.
Remove the water bottle and bottle support collar.
3.
Drain the reservoirs (see Draining the Reservoirs, pg 5).
4.
Pour the vitapur
®
water dispenser cleaner or a mixture of 4 cups / 1L of
vinegar with 4 cups / 1L of hot water into the reservoir and wait
20 minutes. If using a water dispenser cleaning solution, please
follow the manufacturer's instructions.
IMPORTANT: To avoid water overflow while cleaning dispenser, always remove the bottle support collar before
pouring water or cleaning solution into the reservoir (see Figure A, pg 3).
5.
Press/hold all dispensing buttons until water stops flowing from the spigot.
6.
Drain the reservoirs.
IMPORTANT: Drain the water into a container and/or sink, not the drip tray.
7. Rinse with clean water.
8.
Replace the bottle support collar and the water bottle (see Installing the Water Bottle, pg 3).
IMPORTANT: Drain approximately 4 glasses of water from each button before initial use. This does not need to be
done with replacement bottles.
Going Away on vacation
When not using the dispenser for long periods of time or when going on vacation, unplug the dispenser and drain the
reservoirs (see Draining the Reservoirs, pg 5). Follow Initial Product Cleaning Procedures upon return and startup of the
dispenser.
SPECIFICATIONS
Cleaning Kit
Available online at
www.greenwayhp.com
6
WARNING:
The Water Dispenser heats
and dispenses water to 201˚ F / 91˚ C
which can cause severe burns or scalding.
DO NOT AllOW CHIlDREN TO
USE THE HOT WATER DISPENSING
BUTTON WITHOUT PROPER AND
DIRECT SUPERvISION.
Child Resistant
Safety Switch
vWD2636-3
Output per hr
:
Hot
1.39 gal / 5.0 L
Cool
0.11 gal / 0.40 L
Internal Tank Capacity
:
Hot
0.13 gal / 0.6 L
Cool
0.18 gal / 0.8 L
Heating Temp (approx.)
:
201°F / 91°C
Cooling Temp (approx.)
:
42.8°F - 46.4°F / 6°C - 8°C
Power Consumption (Watts)
:
Hot
1150 W
Cool
72 W
Power Consumption (Amps)
:
Hot
9.0
A
Cool
0.9
A
voltage
120 V
