21
21
Fig. 3.6
Turn on the power with external mechanical switch «I/O» on the rear panel by setting it into the
«I» position pos.1. Open the cover. Turn on the power with the button pos.2 figure 3.6. The
indicators on fields «POWER» and «PARAMETER SETUP» will start indicating.
3.5. Parameter setup
The field «PARAMETER SETUP» figure 3.7 is used for selection of one of three generation
frequencies f1, f2, f3, one of three modes of sine generation (continuous «CO», one frequency
transmission «PU», three frequencies transmission «3F» or charging mode «CH») and of four
current loads. If necessary the “banks” of currents and frequencies can be modified quickly. The
use of the transmitting antenna as a load is possible only if a generation frequency of 8928 Hz
which is set automatically when the antenna is connected to the output.
Fig. 3.7
Содержание IFL-1210
Страница 1: ......
Страница 36: ...CONTACT INFORMATION VITALDRIVECY VITALDRIVE NET SALESVD VITALDRIVE NET...