20
Section 22:
Using Bluetooth to Upload Oxygen Saturation (Nonin 3150 Wrist)
The Nonin Model 3150 is an optional pulse oximeter
device that measures blood oxygen saturation (%SpO
2
)
and uploads readings automatically using Bluetooth. It is
worn continuously on the wrist and uses a separate
fingertip sensor. Use as directed by your care team.
Refer to the Nonin Medical Model 3150 Operator’s
Manual to perform the following tasks:
• Unpack the device and install batteries.
• Attach the wristband.
• Attach the sensor. Note that different sensor types
are available. Use the type recommended by your
care team.
1. Find the Bluetooth ID (Optional)
Note: This step is optional, and is only necessary when
using the Model 3150 in an environment where multiple
similar devices are being used (such as a hospital).
Turn the Model 3150 wrist unit over and examine the
label. The Bluetooth ID begins with “BDA”. You will need
this for
Step 4 below
.
2. Put Device in Pairing Mode
Remove and reinstall the batteries on the Model 3150
wrist unit. This places the Model 3150 in pairing mode
(the wrist unit display turns on and displays a Bluetooth
Symbol). The unit will remain in pairing mode for 2
minutes.
Model 3150 Wrist Unit
Fingertip
Sensor
Bluetooth ID
NOTE: If the device has already been paired, go directly
to
Step 4 “Start Continuous Measurement”
below.
Bluetooth Symbol
Nonin 3150 Pulse Oximeter
