VITAECO HotmixHOME, Инструкция по эксплуатации, Страница: 19 / 30

19
Single step of a recipe
When you pick a recipe of which you want to make a single step with the delayed start, first you need to do
the above steps in the ordinary way, then once the last step is over, and before you give the start to the
next step, press and hold for 5 seconds the “clock” button and you will hear 3 beeps.
Now the display shows “- -: - -” with the first two lines that are flashing, they indicate the hour, with the “+”
and “-” buttons you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the button “start / stop”: after
flashing the second two lines indicate the minutes: with the same procedure for storing the hours, you now
store the minutes.
Then, you must set the time at which you want the appliance getting started, with the same system by
which you had set the hour earlier.
In this case, the step being part of the chosen recipe starts. At the end of it, the machine stops and
waits for the start of the next step, or it beeps while the recipe has been completed.
WARNING: Always check that the ingredients are being introduced in the recommended amount as
per the display indication.
WARNING: Failure to maintain the quantity of food could cause serious damage to things and
people.
WARNING: Never leave your appliance unattended during the operations.
It is possible to check if set data are correct when the machine is in standby, with the clock flashing,
by pressing the start / stop button: set digits appear in sequence with the appropriate icon.
When making this operation, if you realize that you have set wrong data, please press the recipe icon for 5
seconds, then you hear 4 beeps, and all data settings will be deleted with the exception of the current time.
MAINTAINING TEMPERATURE
For this function, there is the program R-Pre in the recipe memory: “ MAINTAINING TEMPERATURE ”
After pressing the START / STOP button, you’ll need to set the temperature (ranging from 25° to 95°) with
the “+” and “-” buttons, then once the selected temperature is confirmed by pressing “Start / Stop” button.
You should then confirm the time (max 2 hours and 30 minutes), then after pressing “start / stop”, the
robot will start reheating the food at speed 0 at the set temperature and time.
HOW TO USE THE PRODUCT PROPERLY

To chop, grate, pulverize and mount, the bowl should be perfectly clean and dry.

To chop, grate, pulverize and mix, the volume of ingredients should never exceed half of the bowl.

When you need to chop, you should remind that speed is proportional to the hardness of the
ingredients, while time is proportional to the quantity of the ingredients by chopping.

When you are chopping small amounts of food (cloves of garlic, a sprig of parsley, etc..) you should
program speed and introduce the ingredients all of a sudden through the hole in the lid.

When you wash the blades, dry them very well and, if necessary, mount the unit to work for a few
seconds at maximum speed, so that drops of water will step down the inside of the bowl.