VITAECO HotmixHOME, Инструкция по эксплуатации, Страница: 18 / 30

18
SPECIAL FUNCTIONS
DELAYED DEPARTURE
There are 3 ways to operate the machine with the late departure:
Manual programming:
When the machine is turned on, to set the current time, press and hold the button “clock” for 5 seconds till
you will hear 3 beeps. Now the display shows “- -: - -” with the first two lines that are flashing, they indicate
the hour, with the “+” and “-” buttons you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the “start / stop” button: after
flashing, the second two lines are to indicate the minutes: with the same procedure you store the minutes.
Then, you must set the time you want the appliance get started, and with the same system you set the
hour.
Once you confirm the information with the START / STOP button, the display will show the clock icon,
which means that we must set (again with the “+” and “-” buttons) the time we want the machine starts
working; it must be confirmed by pressing “start / stop” as well.
Next, the display shows the icon of the thermometer, if you want to set a temperature, always with the “+”
and “-” buttons, and pressing the “start / stop” button to confirm. If you do not want any temperature,
press the “start stop” button and skip this step.
Now the blades’ icon appears on the display, and as above, adjust the speed with the “+” and “-” buttons,
and store the data. If you want a speed pulse, press the “pulse” button before storing the data.
Once you set the last digit of speed, you will hear 4 beeps, the machine is put on standby, the display shows
the current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set functions. Speeds will be set only up
to 3, the temperature will be up to 115°C (also WT).
Complete recipe in memory:
Once selected a recipe that you want to perform with the delayed start, press and hold for 5 seconds the
“clock” button and you will then hear 3 beeps. Now the display shows “- -: - -” with the first two lines that
are flashing, they indicate the hour, with the “” and “-” you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the button “start / stop”: after
flashing the second two lines indicate the minutes to the same procedure time you store the minutes.
Then, you must set the time when you want the appliance will get started, with the same system with
which he had set the hour earlier.
Once you set the last value, you will hear 4 beeps, the machine is put on standby, the display shows the
current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set function.
In this case, the first step of the recipe selection starts, then once finished the machine stops and
waits for the start for the next step.
WARNING : Always check that the ingredients are introduced in the recommended amount from the
display.
WARNING: Failure to maintain the quantity of food could cause serious damage to things and people
WARNING: Never leave your appliance unattended during the operations.