Vista VK2-3MPVRDIR3V9F, Быстрое руководство

Страница: 3 / 12

3
1. Description
This manual applies to the VK2-3MPVRDIR3V9F 3 mega pixel Vandal resistant vari-focal dome with
IR illumination.
• Installation Steps
Follow these steps to install the network camera on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the Network Camera. See page 3.
3. Set an IP address. See page 6.
4. Set the password. See page 8.
• Package Component
The system comes with the following components:
Camera unit
Installation CD Installation Guide Template Sheet Accessory Kit
Check your package to make sure that you received the complete system, including all components
shown above.
• Contents in the installation CD
1. The Network Camera
User’s Manual
2. The SmartManager
User’s Manual
3. The VK2_Client User
’s Manual
4. The SmartManager Installation software
5. The VK2-Client Installation software
Note: Check your package to make sure that you received the complete system, including all
components shown above.
2. Installation
For the operation of the Network Camera, it is necessary to connect a network cable for data
transmission, power connection from supplied power adapter. Depending on operation methods, it is
possible to connect an alarm cable additionally. For its fixation on different locations, please consult
with an installer.