Vista VDC1604, Инструкция по эксплуатации, Страница: 16 / 40

Page 16
VDC1604 VISTA DOME CONTROLLER Installation and Operating Instructions
Main Menu
4 Camera Setup
Seq/View functions
Alarm handling
Control access
Time and date
Display set up
System settings
Exit menus
Installer Main Menu
PROGRAMMING
The VDC1604 menu system allows you to customise the system to meet your specific requirements. There are two
levels of menu, Installer and User . When the operator enters the Installer password, the Installer menu system is
accessible. Conversely, when the User password is entered, the User menu system is accessible. The User menu has
fewer options than the Installer menu but they operate in exactly the same way.
User menu
4 Time and date
Program View
Program Sequence
Display setup
Alarm event log
Exit menus
User Main Menu
Password: * * * *
Password entry screen
Part No: Pro Matrix
Unit ID: 9
BaxNet: 19200
Software Version: B.18 PAL
OS version: 2.03
Software version screen
ENTERING THE MENU SYSTEM
The menu system is entered by pressing the Menu
M
key for at least 2 seconds.
Note that a valid monitor (1 to 3) must be selected before menu access can be
gained. A screen showing the software version will be displayed. Press the
enter key. The menu access screen will now be displayed prompting for a
password.
Password Entry
Enter the password using the numerical keys, then press the enter key. The
password entered will depend on whether you wish to enter the User menu or
the Installer menu.
Note
The factory set default password for the Installer menu is 7, 8, 9, 0. The
default User menu password is 1, 2, 3, 4. It is strongly advised that you
change these passwords as soon as possible in order to maintain system
security. Passwords may be changed in the System settings Menu.
Once the password has been correctly entered, the Installer or User Main
Menu screen will be displayed.
Note: If a password is lost, a recovery system is available. See Appendix A .
MENU NAVIGATION
The joystick is used to navigate the menu system. A field that can be edited is
shown in reverse video. In general, a menu item is selected and edited as
follows:
1. Use
Joystick Up/Down movements to move up or down between fields
and/or menu items. The selected field is indicated by a cursor symbol 4 .
2. Press the Enter key (or Joystick right) to enter edit mode for the selected
menu item or field. The cursor will change from 4 to + to indicate that you
are in edit mode.
3. Then use either:
the Joystick Up/Down movement to select items from picklists, or
the Numerical keys to input numerical data
the Joystick Left to escape to the previous menu
the Joystick Right to perform an enter command
4. Press the Enter key (or joystick right) to exit edit mode. The cursor will
change from + to 4 .