Vista QNVR04P, Инструкция по установке и эксплуатации

Страница: 40 / 87

40
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Automatic timed log out
The system can be set to automatically log out a user after a certain amount of time if no key
presses have been made. The operator level has to have been activated before this can be
set.
Click on the boxes adjacent to
“Local” for the time out period for operation from the front
panel. Click on the box adjacent to
“Client” for the time out period for operation from the
client software. This can be set to either: Off, 15 mins, 30 mins or 1 Hour.
Archive log access
Access to the archive log is password protected, use this section to amend the password per
user. This will allow traceability of which user has downloaded information.
3-4. Program Update
Always turn off: Recording, Playback and Network access while upgrading the
unit
The latest firmware version can be upgraded through USB 2.0 port using memory stick.
When a memory stick is connected to the USB port, this symbol ( ) will be shown in the
status bar of the screen.
Enter
“Menu” >> “System” >> “Program Update”. If the system recognizes the new firmware
then,
“New program found” will be displayed on the screen.
Next press the
“SELECT” button, processing percentage will be displayed.
NOTE
1. If the system doesn
’t recognize the new firmware, “New program not found” will be
displayed.
2. For system stability, please turn off 1) recording 2) playback 3) network connection during
upgrading.
3. After updating program, reboot the NVR. The simplest way is press the Power button and
enter the password.