Vista QNVR04P, Инструкция по установке и эксплуатации

Страница: 33 / 87

33
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
2-4. Motion
Motion on any channel can trigger recording of that camera.
This configures the various recording settings per channel in the motion record mode.
The stream, audio are set up in the same way as the normal and alarm recording mode.
Sensitivity
The sensitivity of motion detection, there are 10 levels ranging from 1(low) to 10(highest).
It is recommended that each level is tested to find out which one suits that particular camera
site. The motion detection is not recommended for external cameras.
Post Duration
This allows you to set the time in seconds to post-record after the actual motion recording
has ended. Up to 99 seconds can be set.
Setting the motion detection area
To setup the motion detection area per channel, click
the “Set” button.
The motion detection area allows you to
mask out areas where you would like
motion to be detected in. You can left
click mouse, hold and drag it to mask the
motion detection area.
Click the motion detection area, the pop-
up menu appears.
Check the area number to store the
motion detection area, click
“Accept and
Exit
”.
You can set the motion detection area up
to 8.