DC-1388
DC-1383
DC-1383
DC-1388
DC-1388
DC-1388
DC-1383
DC-1383
DC-1388
DC-1388
101
2 IN [267mm]
101
2 IN [267mm]
DC-1384
DC-1384
10
1
2
" [267mm]
PLACE THE 2x4 STRAPPING PIECES (DC 1383, 1384, 1388) AS SHOWN. EACH
PIECE OF STRAPPING WILL OVERHANG THE END RAFTERS BY 10 1/2" AT EACH
END. THE STRAPPING PIECES EACH HAVE A MARK ON ONE FACE TO
DETERMINE THE POSITION TO ALLOW FOR THE 10 1/2" OVERHANG AT THE
GABLE END. PLACE THE STRAPPING SO THE MARK LINES UP WITH OUTSIDE
OF THE GABLE END RAFTERS. THE OTHER END OF THE STRAPPING WILL LINE
UP WITH THE CENTRE OF ONE OF THE MID RAFTERS.
ATTACH EACH PIECE OF STRAPPING WITH TWO 2 1/2" SCREWS AT EACH POINT
THE STRAPPING CROSSES WITH THE RAFTERS.
PLACE THE STRAPPING USING THE MARKS ON THE TOP OF THE RAFTERS TO
SPACE THEM OUT PROPERLY. ALIGN THE TOP ROW OF STRAPPING ON THE
LONG SIDE OF THE ROOF WITH THE PEAK WHERE THE TWO RAFTERS MEET A
THE CENTRE OF THE ROOF. THE PLACEMENT OF EACH ROW OF STRAPPING IS
SHOWN IN
DETAIL A
BELOW.
2 1/2" ROBERTSON SCREWS
84 req
DETAIL A
NOTE: LOOK FOR MARK ON STRAPPING
B
Mt. ORFORD
0041_Mt_Orford_11x14_Instructions_V1.1
TOLL FREE: 1-877-795-7423
EN
STEP 19
