7-6________________________________________ Connecting to the PowerMax Control Panel
Tip:
If you are not sure of the time to enter in the
Wait for 2-4 rings during
and
Wait for Connection
fields, enter a high number (i.e. 100 seconds), initiate
connection as detailed in Connecting by Remote Connection in Chapter 7. Time
on your watch the number of seconds your modem takes for 2 rings and then
click
Hang Up
. Enter the number of seconds entered in the
Wait for 2-4 rings
during
field and
Wait for Connection
fields.
6. Check
the
Use only additional initialization commands
checkbox to cancel the two
other options. The
Ignore carrier detection
and the
Wait for dial tone before dialing
checkboxes initiate additional initialization commands to be sent by the system.
7.
Make sure that the string of characters in the
Additional initialization
commands
is correct for the selected modem.
If not, click
Select from recommended list
; the Recommended Modem
Initialization Strings screen appears.
Figure 7-6: Recommended Modem Initialization Strings
8.
Select the correct initialization string, then click
OK
; the selected string will
appear in the Additional initialization commands edit box.
9. Click
OK
; the Modem Settings dialog box closes and the Communication dialog
box appears.
10. Click
OK
.
7.1.3 Callback
In the
Phone number
field the user enters the PowerMax Remote Programmer return
telephone number (the telephone number that connects to the modem)
.
In the
Wait before
sending
field, the user enters the amount of time (in seconds) the PowerMax Remote
Programmer waits before identifying the call as failed.
Figure 7-7: Callback Phone Number String
