Data Details Tables __________________________________________________________ 6-7
6.9 Panel Definitions
Panel Definitions enables you to customize the control panel and adapt its characteristics
and behavior to the requirements of the particular user.
6.10 Communications Definitions
Communications Definitions enables you to set the telephone communication parameters to
the requirements of the particular Site.
6.11 GSM Definitions
GSM Definitions enables you to set the parameters of the GSM unit connected to the
PowerMax control panel.
6.12 PGM
PowerMax control panel can open or close the programmable (PGM) output as a result of a
certain event or condition. This table enables you to determine the events and conditions
under which the PGM (programmable) outputs will function.
Note:
In some versions of the P, the PGM will also include a scheduler, (see
6.15 X-10 Device Settings for further details).
When the X-10 device settings table is
uploaded, the PowerMax Remote Programmer will also load the PGM table. However, this
does not occur the other way around.
6.13 Internal Siren/Strobe
This defines the operation of the INT output in the control panel.
Internal Siren - enables you to activate the output for a certain amount of (Bell) time.
Strobe - activates the output until the system is disarmed.
6.14 X-10 General Features
This screen enables you to set the general features for the X-10 units. The House Code
must be a letter between A and P that distinguishes this particular PowerMax X-10 unit
from others.
6.15 X-10 Device Settings
PowerMax control panel can control X-10 units. This screen enables you to determine
settings for each applicable device.
Some versions of the P include a scheduler that enables you to set specific times
for switching the lights on and off and can also be used with the PGM.
The scheduler allows four regular daily settings and four additional settings per day.
