Visonic Fully supervised wireless accessories, Руководство по аксессуарам

Страница: 6 / 30

NEXT PG2, NEXT-K9 PG2
D-302758 5
4. MODIFY DEVICE SETTINGS
This section describes how to configure the parameters of the PIR detector from the PowerMax10-G2 control panel.
To Modify the PIR Detector Device Settings
Refer to the PowerMax10-G2 Installer Guide and perform the procedure for Adding A Wireless Device (section 4.4.2), or,
Modifying a Device (section 4.4.5). Then continue below to modify the device settings.
1.
When the PowerMax10-G2 display reads [
DEV SETTINGS
], press
OK I
.
The PowerMax10-G2 display will read [
Alarm LED
].
OK I
2.
Press the
OK I
button.
The PowerMax10-G2 display will read [
LED ON
„ ].
OK I
3.
Press the or button to select between "
LED ON
" and "
LED OFF
",
for example, "
LED OFF
".
or
4.
Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
Alarm LED
].
OK I
5.
Press the button.
The PowerMax10-G2 display will read [
Event counter
].
6.
Press the
OK I
button.
The PowerMax10-G2 display will read [
LOW sensitive
„ ].
OK I
7.
Press the or button to select between "
LOW sensitive
" and
"
HIGH sensitive
", for example, "
HIGH sensitive
".
or
8.
Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
Event counter
].
OK I
9.
Press the button.
The PowerMax10-G2 display will read [
DISARM Activity
].
10.
Press the
OK I
button.
The PowerMax10-G2 display will read [
NOT Active
„
].
OK I
11.
Press the or button repeatedly to select between "
NOT Active
",
"
YES – no delay
", "
YES + 5s delay
", "
YES + 15s delay
", "
YES + 30s
delay
", "
YES + 1m delay
", "
YES + 2m delay
", "
YES + 5m delay
", "
YES +
10m delay
", "
YES + 20m delay
" and "
YES + 60m delay
", for example, "
YES –
no delay
".
or
12.
Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
DISARM ACTIVITY
].
OK I
When exiting "
ZONES / DEVICES
" menu the PowerMax10-G2 system displays the
number of devices that need to be updated, as follows: DEV UPDATING NNN.
For detailed instructions on ADDING DEVICES, DELETING DEVICES and
MODIFYING DEVICES see the PowerMax10-G2 Installer Guide.
DISARM ACTIVITY
YES – no delay
„
YES – no delay
NOT Active
„
DISARM Activity
Event counter
HIGH sensitive
„
HIGH sensitive
LOW sensitive
„
Event counter
Alarm LED
Alarm LED
LED OFF
„
LED OFF
LED ON
„