background image

D-303363 MCT-442 SMA Installation Guide 

WARRANTY

 

Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser only (the 
“Purchaser”) against defective workmanship and materials under normal use of the Product for a period of 
twelve (12) months from the date of shipment by the Manufacturer.   
This Warranty is absolutely conditional upon the Product having been properly installed, maintained and 
operated under conditions of normal use in accordance with the Manufacturers recommended installation and 
operation instructions.  Products which have become defective for any other reason, according to the 
Manufacturers discretion, such as improper installation, failure to follow recommended installation and 
operational instructions, neglect, willful damage, misuse or vandalism, accidental damage, alteration or 
tampering, or repair by anyone other than the manufacturer, are not covered by this Warranty. 
The Manufacturer does not represent that this Product may not be compromised and/or circumvented or that the 
Product will prevent any death and/or personal injury and/or damage  to property resulting from burglary, 
robbery, fire or otherwise, or that the Product will in all cases provide adequate warning or protection.   The 
Product, properly installed and maintained, only reduces the risk of such events without warning and it is not a 
guarantee or insurance that such events will not occur.  

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, 
OBLIGATIONS OR LIABILITIES, WHETHER WRITTEN, ORAL, EXPRESS OR IMPLIED, INCLUDING ANY 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE.  IN 
NO CASE SHALL THE MANUFACTURER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES FOR BREACH OF THIS WARRANTY OR ANY OTHER WARRANTIES 
WHATSOEVER, AS AFORESAID. 

THE MANUFACTURER SHALL IN NO EVENT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 
CONSEQUENTIAL OR PUNITIVE DAMAGES OR FOR LOSS, DAMAGE, OR EXPENSE, INCLUDING LOSS 
OF USE, PROFITS, REVENUE, OR GOODWILL, DIRECTLY OR INDIRECTLY ARISING FROM 
PURCHASER’S USE OR INABILITY TO USE THE PRODUCT, OR FOR LOSS OR DESTRUCTION OF 
OTHER PROPERTY OR FROM ANY OTHER CAUSE, EVEN IF MANUFACTURER HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGE. 

THE MANUFACTURER SHALL HAVE NO LIABILITY FOR ANY DEATH, PERSONAL AND/OR BODILY INJURY 
AND/OR DAMAGE TO PROPERTY OR OTHER LOSS WHETHER DIRECT, INDIRECT, INCIDENTAL, 
CONSEQUENTIAL OR OTHERWISE, BASED ON A CLAIM THAT THE PRODUCT FAILED TO FUNCTION. 

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising under 
this limited warranty, 

THE MANUFACTURER'S MAXIMUM LIABILITY (IF ANY) SHALL NOT IN ANY CASE 

EXCEED THE PURCHASE PRICE OF THE PRODUCT,

 which shall be fixed as liquidated damages and not as 

a penalty, and shall be the complete and exclusive remedy against the Manufacturer.  
When accepting the delivery of the Product, the Purchaser agrees to the said conditions of sale and warranty 
and he recognizes having been informed of. 
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so these 
limitations may not apply under certain circumstances.  
The Manufacturer shall be under no liability whatsoever arising out of the corruption and/or malfunctioning of any 
telecommunication or electronic equipment or any programs. 
The Manufacturers obligations under this Warranty are limited solely to repair and/or replace at the 
Manufacturer’s discretion any Product or part thereof that may prove defective.  Any repair and/or replacement 
shall not extend the original Warranty period.  The Manufacturer shall not be responsible for dismantling and/or 
reinstallation costs.  To exercise this Warranty the Product must be returned to the Manufacturer freight pre-paid 
and insured.  All freight and insurance costs are the responsibility of the Purchaser and are not included in this 
Warranty. 
This warranty shall not be modified, varied or extended, and the Manufacturer does not authorize any person to 
act on its behalf in the modification, variation or extension of this warranty. This warranty shall apply to the 
Product only.  All products, accessories or attachments of others used in conjunction with the Product, including 
batteries, shall be covered solely by their own warranty, if any.  The Manufacturer shall not be liable for any 
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or otherwise, caused by the 
malfunction of the Product due to products, accessories, or attachments of others, including batteries, used in 
conjunction with the Products. This Warranty is exclusive to the original Purchaser and is not assignable.  
This Warranty is in addition to and does not affect your legal rights. Any provision in this warranty which is 
contrary to the Law in the state or country were the Product is supplied shall not apply.  

Warning:

The user must follow the Manufacturer’s installation and operational instructions including testing the 

Product and its whole system at least once a week and to take all necessary precautions for his/her safety and 
the 

protection 

of 

his/her 

property. 

 

              1/08

 

 

 

W.E.E.E. Product Recycling Declaration

 

For  information regarding the recycling  of this product  you must contact the  company from which you orignially purchased it. If you are discarding this product and not 

returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste. 
Directive 2002/96/EC Waste Electrical and Electronic Equipment.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

VISONIC LTD. (ISRAEL): 

P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788 

VISONIC INC. (U.S.A.): 

65 WEST DUDLEY TOWN ROAD, BLOOMFIELD CT. 06002-1376. PHONE: (860) 243-0833, (800) 223-0020. FAX: 

(860) 242-8094 

VISONIC LTD. (UK): 

UNIT 6 MADINGLEY COURT CHIPPENHAM DRIVE KINGSTON MILTON KEYNES MK10 0BZ.  

TEL.: +44(0)845 0755800 FAX: +44(0)845 0755801  PRODUCT SUPPORT: +44(0)845 755802

 

VISONIC IBERICA

: ISLA DE PALMA, 32 NAVE 7, POLÍGONO INDUSTRIAL NORTE, 28700 SAN SEBASTIÁN DE LOS REYES, (MADRID), 

ESPAÑA. TEL (34) 91659-3120, FAX (34) 91663-8468. www.visonic-iberica.es 
INTERNET: www.visonic.com 

VISONIC LTD. 2011    MCT-442 SMA   D-303363  Rev 3 (10/11)

 

Product 

Certificate Number 512e/01

 

 

  

 

Содержание CLIP SMA





























Отзывы: