VisionxIP VxIP 7111, Руководство пользователя

Страница: 47 / 77

Mail: info@visionxip.com
Web: www.visionxip.com
47
Basic Setting > Network > Streaming (streaming setting)
Setting of the video steaming port (HTTP and factory default are recommended)
1. HTTP: Port 80 can pass through most firewalls. Video streams are transmitted
through HTTP Port (80 by default) to ensure passage through firewalls.
2. RTSP: Port 554 uses a fixed port (i.e. TCP) or can be defined by users to ensure
reliable data transmission. Video streams are transmitted through RTSP Port (554
by default) to avoid video fragment or mosaics due to poor transmission quality.
3. RTP: Port 50000 to 60000 are UDP ports and can be defined by users. They
provide the fastest but also most unreliable transmission service. Video streams
are transmitted through UDP Port (50000~60000 by default) to ensure the fastest
image transmission. However, video fragment or mosaics may occur due to poor
transmission quality.
Basic Setting > Network > PPPoE (dial-up networking setting)
PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a
high-speed wideband network using a PC and a wideband modem (such as xDSL,
Cable, Wireless modem). The user need only to equip the PC with an Ethernet card
and apply to an ISP (such as HiNet) and an ADSL provider (such as Chunghwa
Telecom) for ADSL service to roam the Internet through ordinary twisted copper
wires.
PPPoE: Point to Point Protocol over Ethernet is applicable to networking via a xDSL
or cable modem. PPPoE setting must be executed in the LAN environment for your
PC to connect to ADSL. Follow the steps below to complete the setting:
1. Dial: You can select whether or not to dial when you boot the machine.
2. Use DHCP or fixed IP for connection to the LAN environment. Key in the IP
address of the product and enter "PPPoE Setting" following the route Setting
Î
Basic Setting
Î
Network
Î
PPPoE.
3. Key in the xDSL "Username" and "Password" acquired from your ISP. Click
Save to confirm the setting.
Streaming port setting