VisionTrack VT4000, Руководство пользователя

Страница: 8 / 47

8
FUNCTIONS
Automatic Booting
Make sure the main unit and all components are properly connected.
Once the VT4000 has been wired to your car power source the VT4000 will
boot up, this will take around 30 seconds for the unit to be ready to record.
NOTE: The unit will not start recording immediately after power on. It takes
around 30 seconds for the built-in power backup system to charge.
Thereafter, the SD card will be ready to record.
NOTE: The DRV file consists of GPS and G-sensor data and it helps to find
specific data or driving behaviors. The DRV file overwrites the oldest data.
The DVR files will be made every 10 minutes.
Continuous Record (When Record mode set as “Continuous”)
This is the default mode for recording. In this setting the unit will begin
recording after boot up and record the entire time the unit is powered.
The resolution and frame rates can be set as per your requirements. You can
change the configuration of the recording using the VT4000 configuration
Tool. To do this, please see the ‘Settings’ section on page 21.
Event Record (When Record mode set as “Event”)
The unit will record when triggered by an impact(G-Sensor) or a push of the
‘PANIC’ button or Over speed or Alarm In1~3. Each event file contains up to 20
seconds prior & up to 20 seconds post event.
And the event file can be extended by 2nd trigger during event record.
When events are triggered continuously, for every event, 20 seconds post-re -
cording from the time of the event will be added to the event data file with a
maximum recording time of 3 minutes. When this 3 minutes is reached, the
file will be split and a new file will be created but the data will be continuous.
Dual Record (Continuous & Event Record)
The continuous record fps is 1fps and the file will be stored on the “Normal”
folder. Event record will work according to the fps setting for example
30frames per second recording and the file will be stored on the “Event”
folder.
DO NOT RECORD
The DRV (Drive Data) file will be recorded during driving at “Do Not Record”
mode. And the unit can send limited API like live track to Server.