DQ Technology, Inc. / VisionNet
Page 96
M605N User Manual Revision 3.1
Section 10.3 – WIRELESS ENCRYPTION
When to change the Wireless Encryption
You may wish to use a special login password for your wireless network.
NEVER LEAVE YOUR NETWORK UNENCRYPTED!!! THIS IS VERY INSECURE AND COULD RESULT IN LEGAL TROUBLE SHOULD AN
UNAUTHORIZED USER USES YOUR NETWORK FOR ILLEGAL ACTIVITY!
Step 1: Direct Your Browser to the Security Settings Page
1.A
Select the
“Wireless”
tab located within the left-‐hand frameset.
Then, In the left-‐hand frameset,
select
“Security Settings”
1.B
Under “Manual Setup AP”
Select SSID
Choose your network
name
Network
Authentication
WPA2-‐PSK is preferable.
Some devices may
require WPA-‐PSK
WEP should not be used
unless the consumer
device in question only
support WEP
WPA
Passphrase
Enter the new password
Group Rekey
interval
0
WPA
Encryption
AES is preferable
Some devices may
require TKIP+AES
1.C
Select the
“Click Here to Display”
Button; and verify your encryption key.
1.D
Select the
“Save/Apply”
Button.
