DQ Technology, Inc. / VisionNet
Page 70
M605N User Manual Revision 3.1
Section 6.5 – Algorithm Enable / Disable
Algorithms Defined
The VisionNet gateway can open ports, based on industry standards and conventions, when certain traffic is detected. You
must enable or disable these algorithms to adjust operation.
These algorithm port conventions are only honored when the Firewall is enabled
Step 1: Direct Your Browser to the Algorithm Page
1.A
Select the
“Security”
tab located within the left-‐hand frameset.
Then, In the left-‐hand frameset,
select
“Algorithm
1.B
Enable / Disable Algorithms
H323
IRC
RTSP
IPSEC
SIP
1.C
Select
“Apply Save”
