DQ Technology, Inc. / VisionNet
Page 66
M605N User Manual Revision 3.1
Step 2: Configure the Port Forwarding Rule
2.A
Select the appropriate WAN Interface
If the Service you would like to
have is already available in the
“Select a Service”
menu, you may
select this service for auto-‐
population.
You may create a custom Service
by selecting
“Custom Application
”
and entering a new rule name
2.B
Enter the port rules
Trigger
Port Start
This is the port that the LAN
device uses to initiate a
session
Trigger
Port End
This will usually match the
“Trigger Port Start” parameter;
some applications, however, may
use a succession of ports.
In this case you will enter the
final port in that range.
If these ports are not in
succession, you must enter the
next port as another row in the
rule
Protocol
This should be “TCP/UDP” to
avoid possible errors due to
end-‐user mis-‐communication
Open Port
Start
This is the WAN Port that the
remote server will reply on
Open Port
End
This will usually match the “Open
Port Start” parameter; some
applications, however, may use a
succession of ports.
In this case you will enter the
final port in that range.
If these ports are not in
succession, you must enter the
next port as another row in the
rule
Open Port
Protocol
This should be “TCP/UDP” to
avoid possible errors due to
end-‐user mis-‐communication
2.C
Select
“Save/Apply”
