Visionis VS-AXESS-1ETL, Руководство пользователя

Страница: 112 / 123

Access Control Terminal
·
User Manual
104

The door status of open, close, remain open, and remain close cannot be triggered at
the same time.

The target door and the source door cannot be the same one.
3. Click Save button to save and take effect of the parameters.
Card Linkage
Steps:
1. Click to select the linkage type as Card Linkage .
2. Input the card No. or select the card from the dropdown list.
3. Select the card reader from the table for triggering.
4. Set the linkage target, and switch the property from to to enable this function.
Host Buzzer : The audible warning of controller will be triggered.
Capture : The real-time capture will be triggered.
Card Reader Buzzer : The audible warning of card reader will be triggered.
Alarm Output : The alarm output will be triggered for notification.
5. Click Save button to save and take effect of the parameters.
9.8.4 Cross-Device Linkage
Purpose:
You can assign to trigger other access control device’s action by setting up a rule when the access
control event is triggered.
Click Cross-Device Linkage tab to enter the following interface.
Click Add button to add a new client linkage. You can select the event source as Event Linkage or Card
Linkage .