Visioneer PATRIOT P90, Руководство пользователя

Страница: 48 / 61

V
ISIONEER
®
P
ATRIOT
TM
P90 M
AINTENANCE
48
S
CANNER
U
SER
’
S
G
UIDE
8. Slide the new roller onto the bar. Make sure the struts on the bar line up to the slots in the end of the roller.
9. Insert the metal end of the roller into the slot in the scanner. Carefully lower the roller into the scanner. Make
sure the groove on the right side of the roller is aligned so that it slides in place into the U-shape of the
bracket.
10. Move the plastic tab down.
11. Press down on the roller cover and carefully push it closed to lock it in place. Make sure everything is aligned
properly and the cover is fully closed. If the cover is not fully closed it will break during scanning and damage
the scanner.
12. Close the scanner when you’re finished.
T
ROUBLESHOOTING
Problem : The scanner won’t scan. What’s wrong?
Check for one of these possible causes:
n Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure the cables are
plugged in securely.
n Is the scanner’s status light on? Turn on the scanner’s power. If the status light doesn’t come on, plug the
power supply into another electrical outlet. If you are using a UPS battery back-up or power strip, try
plugging the scanner directly to a wall outlet.