14
Chapter 3. Installation and Operation
The packing condition and the external outlook of the unit should be inspected
carefully before installation. Retain the packing material for future use.
3.1. Unpacking
1. Take the UPS out of the PE foam.
2. Unwrap the UPS.
a. The UPS itself is over 160kgs, so be careful when unpacking and lifting
the unit. Improper use of force might harm yourself.
b. The plastic bag holding the UPS is very slippery so be careful in
unpacking and holding the unit. The unit might drop accidentally and harm
yourself.
3. Standard Package includes:
-1 set of User's Manual
-1 set of UPS communication software with RS232 cable
3.2. Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the advice below:
1. Keep at least 20cm (8 inches) clearance
from the rear panel of the UPS to the wall.
2. Do not block the air-flow to the ventilation
openings of the unit.
3. Please check the installation site to avoid
overheat and excessive moisture.
