5
LIGHTING EVOLVED
UNITE MODULAR BAR
4.
Prep the Quick Connect Rail by installing the left (passenger side) wing
mount using 2 wing mount bolts and a 13mm socket wrench. (Figure 4.)
5.
Slide the first module onto the quick connect rail by aligning the T-Nuts
on the back of the module.
NOTE:
If you find it difficult to slide on, try
loosening the T-Nuts a couple more threads. (Figure 5.)
6.
With the first module on, continue to slide on the following modules
making sure to add the “H” Power Bridge to each module before sliding it
on. (Figure 6.)
NOTE:
Firmly press each module into the next to ensure
the “H” Power Bridge is making solid contact.
7.
For the last module, you will need to install the Deutsch Power Connector
on the right side of the module before sliding it onto the mounting rail. To
install, firmly push the connector into the module and secure using one of
the set screws and the 2.5mm Allen Key. (Figure 7.)
FIG. 4
FIG. 6
FIG. 5
FIG. 7
Содержание UNITE Series
Страница 11: ...11 LIGHTING EVOLVED UNITE MODULAR BAR ...
