Vision X UNITE Series, Руководство по установке

Страница: 4 / 12

4
VISIONXLIGHTING.COM
INSTALLATION INSTRUCTIONS
UNITE MODULE ASSEMBLY INSTRUCTIONS
1. Included with each module is a set of allen head bolts and locking
T-Nuts. Insert the two allen head bolts from the back and loosely thread
on the locking T-Nuts with the rounded end facing towards the module.
Leave about a 2-3 threads gap. (Figure 1.)
2. With all the modules prepped, decide which module will be on the left
end (passenger side) of the bar. For this module, you will need to install
the power end plug/cap. To install, press the plug/cap firmly into the
module and secure using one of the set screws and the 2.5mm Allen
Key. (Figure 2.)
3. Next, insert the “H” Power Bridge into the right side of the first module.
The Bridge is not polarity specific, so there is no wrong way to insert it.
(Figure 3.)
FIG. 1
FIG. 3
FIG. 2