Vision Tech Shop TVC Series, Техническое руководство

Страница: 10 / 28

TVC Counting Scale Technical Manual (v1.09b-v1.11)
- 10 -
5. OPERATION
Initial Start-Up
Warm-up time of 15 minutes stabilizes the measured values after switching on
1.
Power ON/OFF
Power switch is located below the right side of the scale. Press the key
forward until to turn on. The display is switched on and the self test is
started. If you want to switch off press the key forward again.
2. Zero
Environmental conditions can lead to the balance exactly zero in spite
of the pan not taking any strain. However, you can set the display of
your balance to zero any time by pressing key and therefore
ensure that the weighing starts at zero.
3. Tare
The weight of any container can be tared by pressing tare button so that
with subsequent weighing the net weight of the object being weighed is
always displayed.

Load weight on the pan.

Press key. Zero is displayed, and tare is subtracted.

Remove weight from the platform. Tared weight is displayed. It can set
only one tare value. It can display with a minus value.

Press key. Zero is displayed, tare weight is cleared.
4. Weighing Units
In the zero point and stable indicator on, press key to select the
weighing units(kg/lb)
5. PARTS COUNTING
5.1. Setting Unit Weight

For this function you need to know the average weight of the objects to
count. This value can be obtained by weighing a known number of pieces
so that the balance calculation.

Scales can be used to calculate the unit weight or the manual input of unit
weight can be used. It can increase the precision of the unit weight at any
time during the process of counting by the count displayed and pressing