ENGINEERING
GUIDES
Date of last revision: 2.06
TREADMILL.UPPERBDENG.DELUXE.REV1
6
USER ENGINEERING MODE (DELUXE ONLY)
Your treadmill offers a User Engineering Mode that can access certain data and help to troubleshoot your treadmill.
User Engineering Mode is designed for you to access functions that will not affect important treadmill settings. To
access this mode please hold down
“SPEED DOWN”
and
“SELECT”
for 5 seconds while the treadmill is in any state
of setting up a program. When in the User mode,
""UUSSEE ""
is displayed. To access the data press the
“SPEED”
and
“ELEVATION”
keys to scroll through the available data/functions. To select the data/function, press
“SELECT”
. To
exit, press
“STOP”
. The units screen will appear when entering user engineering. If the units are correct press
“STOP”
.
UNITS
P6 represents units, English or Metric. You can select this configuration for your Treadmill.
““MMII””
or
““KKMM””
appears in the dot matrix. If it is
““MMII””
, the Treadmill is configured in English units (miles/mph);
““KKMM””
represents
a Metric configuration (kilometers/kph). Press the
“SPEED”
arrows to toggle between English and Metric.
In order to save the modified value, press and hold
“SELECT”
. Note that changing units does affect the stored value
of weight and clears any stored user programs. Changing units may also require you to perform auto-calibration.
MAX TIME
P7 represents the maximum time, which is displayed in the upper right window. This is the maximum amount of time
the Treadmill will display. You can modify this time by using the
“SPEED”
or
“ELEVATION”
arrows. Press and hold
“SELECT”
to save the new value.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the upper left window. To modify weight, press the
“SPEED”
arrows.
To save the new default weight, press and hold
“SELECT”
prior to exiting. If Units is modified immediately prior, weight
defaults to 150 lbs. or 68 kg.
ACCUMULATED TIME
P9 represents accumulated time, in hours. To exit, press
“STOP”
. This information can not be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. To exit, press
“STOP”
. This information can not
be modified.
PAUSE TIME
P14 represents the pause time, which is displayed in the upper right window. The default pause time is 5 minutes.
You can modify the pause time from 20 seconds to 10 minutes. You can modify this time by using the
“SPEED”
or
“ELEVATION”
arrows. Press and hold
“SELECT”
to save the new value.
DEFAULT TIME
P15 represents the program default time, which is displayed in the upper right window. Most programs have a default
time of 30 minutes. You can modify this time by using the
“SPEED”
or
“ELEVATION”
arrows. Press and hold
“SELECT”
to save the new value.
Deluxe Upper Board: Engineering Guide
