Viscount Prestige Organs, Руководство для продвинутых пользователей

Страница: 17 / 80

15
Advanced Manual - Viscount
Prestige
o
KEY RANGE: sets the section of the manual on which the voice will be played.
The first value on the left is the bottom note of the section of the manual, and the second value
the highest note.
Here again, after making the settings you require, press [EXIT] to save all the settings and return to
display of the previous video page.
SAVING VOICES AND PARAMETERS IN THE MEMORIES
As we have already seen, a given sound can be assigned to each Orchestra register, and this sound
can be further customised using the relative setting parameters.
The general and dedicated memories are able to save the sound and the settings for each register, so
that different Orchestra registers can be set for each memory.
For example, in one memory the first pedal voice may be an acoustic bass transposed by one
octave, while in another memory the first Orchestra voice may be a cello, not transposed but a bit
brighter than the standard setup.
To program memories with different Orchestra voices, simply select the sound required and/or
adjust the parameters using the functions already described and save the memory of your choice.
If you wish to set a different Orchestra voice in another memory but on the same register, select the
sound, adjust the parameters as required and save all the settings in another memory.
N.B.:
- Orchestra sounds and parameters cannot be stored in the Tutti or the Crescendo, which
only save the status (on-off) of the voices.
-
At switch-on, the voice of a given Orchestra register will be the one set with the organ in
HR before the last switch-off.