43
Advanced Manual - Viscount
Prestige
To recall the Preset selection function, locate the cursor on the EXT. VOICES ROUTER field in the
MIDI&UTILITY menu and press [ENTER]. The video page displayed is as follows:
The
MODE
parameter allows you to recall the Preset required.
In Prestige models 40 and 50 you have to inform the organ about the number of connected acoustic
boxes. Set the outputs number you are using under the item
SPEAKERS
.
In addition, by selecting the ORCH&INPUT field you can view the routing settings for the Orchestra
voices and line inputs:
WARNING!
-
It is important to remember that if one [MAIN OUT] socket is not connected, the following
sockets are also disabled. This means that if socket [2] is disconnected, sockets [3] and
[4] and the following sockets will not be enabled.
-
To prevent wind-chest simulation setup errors, the speakers must be positioned in
accordance with the numbering of the outputs. The speaker connected to output [1] must
be placed on the far left (looking at the organ from the rear panel). After this, the speakers
connected to outputs [2], [3], etc. will be placed further and further to the right, until
output [8] (in models 100, 80, 70 and 60) or [4] (in models 50 and 40) is positioned on the
far right.
EXTERNAL OUTPUTS VOICES ROUTER
Mode:Division1 [ORCH&INPUT]
EXTERNAL OUTPUTS VOICES ROUTER
Mode:Division1 [ORCH&INPUT] Speakers:4
Prestige 100 - 80 - 70 - 60:
Prestige 50 - 40:
ORCHESTRA ROUTER = L->Out1 R->Out2
LINE INPUTS ROUTER = L->Out1 R->Out2
On the top line of the display (ORCHESTRA ROUTER), fields
L
and
R
set which of the 12 (4 in
the 40 and 50 models) rear outputs will be used as Left and Right for the Orchestra voice signals.
The bottom line (LINE INPUTS ROUTER) contains the same settings for the audio inputs.
Содержание Prestige Organs
Страница 2: ......
