29
Advanced Manual - Viscount
Prestige
DELAY
Out:All
1
2
3
4
5
6
7
8
CONTROL
YES
13 15 18 9 22 24 15 16
Like the previous video page, this screen also contains an
ALL
field: select
YES
to allow selection
of the pipe distance (in a range from 0 to 31 metres) for each individual output, or select
NO
for
distances automatically set at 0 for all the outputs. If YES is selected again, the values of the latest
setting will be restored.
The first video page displays the distances for the first 8 ([MAIN OUT]) outputs, identified by the
8 numbers shown on the top line. To display the 4 other ([ANTIPHONAL OUT]) outputs, press the
CURSOR [
] button.
As usual, use the CURSOR [
] and [
] buttons to move the cursor and the [VALUE] encoder to
regulate the value.
the individual levels identified by the numbers on the top line of the video page.
Use the CURSOR [
] and [
] buttons to move the cursor and the [VALUE] encoder to make the
setting.
All the levels can be set in a range of values from 1 to 32, with the following relative dB:
-
32: +12 dB
-
20: 0 dB
-
16: -4 dB
-
10: -10 dB
-
1: -19 dB
Naturally, intermediate signal level values will be obtained when values between these settings are
shown on the display.
DELAY TIMES
Another important setting function for the rear outputs regards the delay times which can be applied
to each output individually. A delay time is the time which passes between when the note is pressed
on the keyboard and the start of transmission of the audio signal on the output.
This function allows simulation of different organ pipe distances, up to a maximum of 31 metres;
the system will generate the correct delay for the distance set.
From the EXTERNAL OUTPUTS CONTROL submenu select the DELAY CONTROL field:
- Prestige 100, 80, 70 and 60
Содержание Prestige Organs
Страница 2: ......
