ViscoTec flowscreen, Руководство по эксплуатации

Страница: 13 / 24

flowscreen
Operating Instructions
Copyright © Version 1.0 13 / 24
3.5.3 Diagram, size in display
• Determine the dosing to measured in seconds.
• Determine the maximum dosing pressure*.
• Set diagram size: < Settings > < Graph / Webserver > < Graph >
- max. X-Value = Duration of the dosing in seconds, plus approx. 20%
- max. Y-Value = Maximum dosing pressure in bar
1
, plus approx. 20%
* Tip: If the pressure development for the dosing process is unknown, the pressure can
be read off from the display. Follow: <
Settings > < Sensor X Selection / Calibration > in
<Current Value>
to display the value measured by the sensor. The maximum readable value in a
representative dosing can be used as an approximate Y-value.
3.5.4 Select operating mode
Determine whether the flowscreen analysis system should analyse measurement ranges
or overpressure: <
Settings > < Graph / Webserver > < Graph > < Mode >
Selection:
1.or psi. depending on setting
Range Pressure monitoring within set tolerances
Overpressure Overpressure monitoring