ViscoTec flowscreen, Руководство по эксплуатации

Страница: 16 / 24

flowscreen
Operating Instructions
16 / 24 Version 1.0 Copyright ©
B Pressure gradient
• < Settings > < Limits >
Enter the settings under Envelope Curve .
- 1 = Plus in %
- 2 = Minus in %
- 3 =
Begin
- 4 = End
• In the same display ( Limits , perform three dosings. The measurement range B will be
automatically calculated from the entered data and shown on the display when the the
third measurement is completed. The measurement range for the pressure gradient
(envelope curve) is saved.
Note The Envelope Curve must be recalculated if one of the parameters for the Envelope
Curve is changed.
The envelope curve is deleted in the event of an interruption of the power supply.
C Pressure reduction phase
• Enter the settings under Box2 . For a description, see setting for range A pressure build-
up phase.
1
2
4 3
B
Fig. 6