_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2018
GW1000 Series User Manual
Issue: 2.3
Page 86 of 463
•
Each local filter matched is executed; if there is no match, then the default local
logging action applies.
•
Any remote filter matched is executed; if there is no match, then the default
remote logging action applies.
root@VA_router:~# uci export system
package system
……
config syslog_filter 'local'
list text "...line 1..."
list text "...line 2..."
list text "...line 3..."
...
config syslog_filter 'remote'
list text "...line 1..."
list text "...line 2..."
list text "...line 3..."
...
Lines defined here are copied to the router runtime file /var/conf/syslog.conf which
may be reviewed to determine current rules in use.
10.6.2
Filter definitions
Each filter ruleset is a series of lines. Each line can be:
•
A filter pattern, of the form
facility.[op]severity(pattern) target [~]
•
A blank line, or comment line, starting with hash (#).
If a message does not match any of the filter lines for a destination, local or remote, the
default action for that destination is taken.
The sections of a filter pattern break down as follows:
Section
Description
facility
Any keyword or comma-separated list of keywords from the source facility list.See the
Source Facilities table in section 10.5.1.1.
Use the wildcard '*' to match all facilities.
severity
Any keyword from the event severity list (see Event Severity table above). The rule
will match all severities more urgent f the message severity level is at least as urgent
as this.
Use the wildcard '*' to match all facilities.
