_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2018
GW1000 Series User Manual
Issue: 2.3
Page 80 of 463
Web Field/UCI/Package Option
Description
Web: NTP update interval
UCI: system.ntp.interval_hours
Opt: interval_hours
Specifies interval of NTP requests in hours. Default value set to
auto.
Auto
Range
auto; 1-23
Web: NTP server candidates
UCI: system.ntp.server
Opt: list server
Defines the list of NTP servers to poll the time from. If the list is
empty, the built-in NTP daemon is not started. Multiple servers
can be configured and are separated by a space if using UCI.
By default all fields are set to 0.0.0.0.
Web: Max Round-Tip Time (secs)
UCI: system.ntp.max_ntp_roundtrip_sec
Opt: max_ntp_roundtrip_sec
Defines the maximum time in seconds for an NTP poll. Any polls
that take longer than this will be not be used for NTP calculation.
2
Two seconds.
Range
Web: NTP Server Interface
UCI: system.ntp.listen
Opt: listen
Defines a list of interfaces that respond to NTP requests.
Interfaces should be delimited using space. Example:
option listen ‘LAN1 LAN2’
Blank
Do not respond to NTP requests.
Range
Web: NTP Server Stratum
UCI: system.ntp.stratum
Opt: stratum
Defines how far this NTP Server is from the reference clock. For
example, an NTP server getting time directly from the reference
clock will have a stratum of 1. In general, this should be left
blank, which means that the router NTP Server will derive the
stratum from the NTP dialogue.
Blank
NTP server will derive stratum
Range
Table 17: Information table for time synchronization section
10.3.5
System reboot
The router can be configured to reboot immediately, or scheduled to reboot a configured
time in the future.
In the top menu, select System -> Reboot. The System page appears.
Ensure you have saved all your configuration changes before you reboot.
Figure 47: The reboot page
Check the Reboot now check box and then click Reboot.