Viro Maxi 4875, Инструкция по установке и эксплуатации

Страница: 8 / 22

Maxi 4875 and Midi 4845 Installation and User Manual Page 13 of 40
Open the safe with an Area Master Code
Important !! The Area Master Code can be used only to open the safe, not
to close it (for this operation it is required the Guest Code or the emergency
key).
4.3 The Electronic Security Key (optional)
It is possible to request one or more Electronic Security Keys (see Fig. 5)
and to use them in one of the two following working modes.
A. O
PEN THE SAFE WITH AN
E
LECTRONIC
K
EY
The Electronic Key, combined with a
specifically generated Password, allows the
opening of a specific safe without knowing its
Guest Code and for an unlimited number of
times.
B. O
PEN THE SAFE WITH AN
E
LECTRONIC
K
EY
ENABLED BY THE
E
NABLING
S
AFE
– ONE SHOT
F
UNCTION
The Electronic Key, only if previously enabled by the Enabling Safe and
combined with a Password specially generated, allows to open a
specific safe.
This working mode requires the purchase of one Enabling Safe to be
installed, for example, on the reception of the hotel.
Once enabled, the Electronic Key works for one opening only. To
perform a second opening, it will be again necessary to enable the
Electronic Key with the Enabling safe.
ENTER ENTER Area Master Code
Fig. 5
Maxi 4875 and Midi 4845 Installation and User Manual Page 14 of 40
A Opening of the safe with an Electronic Security Key
In this working mode the Electronic Key, combined with a Password
specifically generated, allows the opening of a safe without knowing its
Guest Code.
It is necessary to enable the Electronic Key in order to open a certain safe.
The Electronic Key enabling has to be done by the owner of the Hotel Code
only.
Once enabled, the Electronic Key could open, for an unlimited number of
times, safes which have the Area Master Code for which the key has been
enabled only.
A.1 How to enable the safe to the use of the Electronic Key
(operation recommended during the first installation)
In order to enable the safes to the use of the Electronic Key:
1. When the door is open, enter the Hotel Menu by pressing:
ENTER - ENTER – digit Hotel Code - ENTER - 9 .
2. Press ENTER 5 times: the message “KEY” appears.
3. Press 1 and then ENTER .
4. The message “VAL” appears: press 0 and then ENTER .
5. The message “SVAL” appears: press 0 and then ENTER .
6. The message “donE” appears indicating the end of the operation.
How to enable the safes to the use of the Electronic Key (door open)
ENTER ENTER Hotel Code ENTER 9
ENTER
5 times,
1 ENTER
0
ENTER 0
ENTER
then