Maxi 4875 and Midi 4845
Installation and User Manual
Page 33 of 40
6.1
How to open with the emergency mechanical key
In order to open the safe with the emergency mechanical key it is
necessary:
1.
Remove the plastic top situated on the door in order to access to the
hole for the key insertion (see Fig. 7 page 32).
2.
Insert the key and turn it clockwise until the full retraction of the
deadbolts. Open the door pulling the key (on the display appears then
the symbol of the emergency key : “
” ).
3.
When the door is open, turn the key counter-clockwise and take it out.
4.
Insert the plastic cap on the hole for the key insertion.
The emergency mechanical opening is registered in the Audit Trail through
the electronic board (and only if batteries are not flat).
Note. After the opening with the mechanical emergency key, the
Guest Code is automatically erased and, moreover, on the display
appears the message “EMER” followed by “HELP”, each time a key is
pressed. This way the safe opening without the use of the Guest
Code is underlined.
6.2
Emergency key duplication (only for Hotel versions with
KA key)
Special profile keys duplication can be done at Viro S.p.A. factory upon
special request proving the right title to receive the copy of the key.
Maxi 4875 and Midi 4845
Installation and User Manual
Page 34 of 40
7 OPTIONALS
7.1
Renting mode
(only for special execution order)
It is possible to require, as a special execution, Maxi 4875 or Midi 4845 safes
to be arranged for the renting mode.
In this mode the safe
functions are blocked and
could be enabled only by
the insertion of a specific
jack onto the relevant plug
placed on the door back
cover.
7.2
Power supply from the electrical mains
(code 4295.0850)
This set allows the use of the external power supply from electrical mains
instead of the standard one supplied by batteries. For the instruction, see
the sheet included in the kit.
Fig. 8
Fig. 9
