1.877.4VPULSE
or
www.virginpulse.com
Wall Mounting
(
NOTE:
For best results, before you hang the phone on the wall, charge the phone on a
flat surface. )
1.
Connect the power and phone cords to the base unit. Make sure to feed the phone cord
through the rectangular opening in wall mount.
2. Turn the base over.
3. Attach the wall mounting bracket by first inserting the tabs on the open edge of the
bracket into the slots on the lower portion of the bottom of the base. Then push down
and snap the bracket into place.
4. Slip the mounting holes (on the back of the base and bracket) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
(
NOTE:
If desired, gather the extra telephone line and power supply cord together, fasten
with a wire tie, and store inside the wall mounting bracket. )
