1.877.4VPULSE
or
www.virginpulse.com
Receiving a Call
1.
Check the display to see who is calling.
2. Press the
talk
button.
Making a Call
To make a call, press the
talk
button before you dial and press it again to hang up. Or you
may dial a number, and then press the
talk
button.
Redial
While the phone is on, press the redial button to quickly redial the last number you dialed
(up to 32 digits). If you get a busy signal, and want to keep dialing the number, just press
redial again (you don't have to turn the phone off and back on). Or you may press the redial
button, and then press the
talk
button.
Flash
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During a
phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID
information for the waiting call shows on the handset display. To connect to the waiting call,
press the flash button on the handset and your original call is put on hold. You may switch
back and forth between the two calls by pressing the flash button.
(
TIP:
Don’t use the
talk
button to activate custom calling services such as call waiting, or
you’ll hang up the phone. )
Charge/In Use Indicator
The phone is ON when the charge/ in use indicator on the base is lit. The charge/in use
indicator on the base flashes when you receive a call.
