background image

1

When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
following:
1.   Read and understand all instructions.
2.   Follow all warnings and instructions marked on the product.
3.   Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners.  Use a damp cloth for cleaning.

4.    Do not use this product near water (for example, near a bath tub, kitchen sink,

or swimming pool).

5.    Do not place this product on an unstable cart, stand, or table. The product may

fall, causing serious damage to the product.

6.   Slots and openings in the cabinet and the back or bottom are provided for

ventilation. To protect it from overheating, these openings must not be blocked
by placing the product on the bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat register.  This
product should not be placed in a built-in installation where proper ventila-
tion is not provided.

7.     This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supply to your
home, consult your dealer or local power company.

8.   Do not allow anything to rest on the power cord. Do not locate this product

where the cord will be abused by persons walking on it.

9.    Never push objects of any kind into this product through cabinet slots as they

may touch dangerous voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of any kind on the product.

10.   To reduce the risk of electric shock, do not disassemble this product, but take

it to an authorized service facility. Opening or removing cabinet parts other
than specified access doors may expose you to dangerous voltages or
other risks. Incorrect reassembling can cause electric shock when the appli-
ance is subsequently used.

11.  Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

12.  Unplug this product from the wall outlet and refer servicing to an authorized

service facility under the following conditions:
A.  When the power supply cord or plug is damaged or frayed.
B.

 If liquid has been spilled into the product.

C.  If the product has been exposed to rain or water.
D.

 If the product does not operate normally by following the operating

instructions.  Adjust only those controls that are covered by the operat-
ing instructions, because improper adjustment of other controls may
result in damage and will often require extensive work by an autho-
rized technician to restore the product to normal operation.

E.  If the product has been dropped and the cabinet has been damaged.
F.

 If the product exhibits a distinct change in performance.

Important Safety Instructions

91-005650-040-000t2455.p65

7/21/2004, 3:51 PM

1

Содержание T2455 - 2.4GHz Dual Handset Cordless Phone System















































Отзывы: