VTech T2455 - 2.4GHz Dual Handset Cordless Phone System Скачать руководство пользователя | Manualshive

Страница: 30 / 46

background image

30

Basic Operation

Battery Care and Maintenance

• This battery should remain charged up to seven days with the ringer turned

on and up to no limited with the ringer off. A fully charged battery provides an
average talk time of about 6 hours.

• The Battery Pack needs charging when:

— A new battery is installed in the Handset.
— The phone beeps twice every five seconds.
— The screen displays

BATTERY LOW

and the low battery icon.

• Place the Handset in the Base or Charger so the

CHARGING

light turns

on.The Battery Pack is typically fully charged in 10 hours.

• You can keep the battery fully charged by returning the Handset to the Base

or Charger after each use.

• If you repeatedly get a low battery indicator, even after charging overnight, the

battery should be replaced.

CAUTION:

To reduce the risk of fire or injury to persons or damage to the

telephone, read and follow these instructions carefully:
Charge the battery provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the User’s Manual.

Replacing the Handset Battery Pack

1. Remove the battery compartment cover on the Handset by pressing on the

indentation and sliding the cover downward.

2. Lift out the old Battery Pack and disconnect.
3. Align the two holes in the new Battery Pack’s plug with the socket pins, and

snap the plug into place. Snap the Battery Pack in the compartment, as
described in the Installation section.

4. Replace the cover by sliding it up into place.
5. The new Battery Pack must be charged before using the phone. Place the

Handset in the Base or Charger and allow it to charge for at least 12 hours
the first charge. The telephone might operate before that, but for best perfor-
mance, let the Battery Pack charge fully.

Batteries

91-005650-040-000t2455.p65

7/21/2004, 3:52 PM

30

«
...
28
29
30
31
32
...
»

Содержание T2455 - 2.4GHz Dual Handset Cordless Phone System















































Отзывы:

Нет отзывов

Похожие инструкции для T2455 - 2.4GHz Dual Handset Cordless Phone System

Бренд: Samsung Страницы: 6

Бренд: 3Com Страницы: 3

Бренд: 3Com Страницы: 2

Бренд: NEC Страницы: 334

Бренд: NEC Страницы: 12

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 57

Бренд: 3Com Страницы: 2

Бренд: Vanderbilt Страницы: 10

Бренд: Uniden Страницы: 32

Бренд: AUDIOLINE Страницы: 48

D7000 Vita Plus

Бренд: switel Страницы: 98

Бренд: Inter-Tel Страницы: 48

Бренд: Radio Shack Страницы: 24

Бренд: Exibel Страницы: 10

Бренд: Philips Страницы: 2

ThinkLink SE8881B/38

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды